Tuesday, June 5, 2012

Window assembly


The front door

In this post I will cover the fabrication of the exterior window frames and then back to the stairwell as the wallpaper is applied.

A quick check to make sure the front door fits in the entryway. The gray ares will be brickwork and the plain wood will be painted white.







Ground floor bay window with sill






Staring with the sash window kits, I removed the stock sill to leave the basic frame. For the ground floor I used 3/8" MDF that will be painted with a buff sandstone finish. the first and second floor windows use mo;ding that will be painted white. Here is one side of the window casing built up with strips of trim.  



First floor window with bare framing
The first piece of trime was planed flush with the corned of the bay window and then the second piece was added. I filed the edge to create a mitered corner. The window header was installed in the same way. Blue painters tape has been indispensable in holding pieces together as the glue dries.


Wood filler to fill the gaps













I used wood filler to fill any gaps with the goal to have the window framing look like an integrated piece. The arched headers were hand carved and then the keystone added on top.


Window frame after sanding


















Finished bare wood casement 







I made the corbels at the base of the arches from a strip of based board. I filed the edges to get a mitered joint and then used wood filler to fill in where the fit was less than perfect.



Completed first floor window with molding cap




All four panels that make up the front of the house. I will also add moulding at the joint between the ground and first floors to disguise the horizontal split and also along the top edge to merge with the roof. Now I need to make a few hundred brick slips to decorate the gray base.


Second floor landing
I hope to have the interior finished by Genevieve's birthday which is rapidly approaching. Here are pictures of the stairwell with the wallpaper installed. The baseboard still needs to be glued on to finish the landings. Wall sconces on each of the landings will illuminate the stairs.


First floor entry hall























Ground floor hallway








Second floor landing with
completed based board















Genevieve waiting patiently






The next task will be to wallpaper the rooms and add the wainscot, chair rails and picture rails.


Genevieve has been practicing her archery when not helping with sanding, polishing and providing creative input. She now knows how to make her point.









No comments:

Post a Comment